- Area
- Oxfordshire
- Postcode district
- OX1
- Nation
- England
- Nearby
- Abingdon, Didcot, Witney
Oxford is in Oxfordshire, and the nearest towns we also cover include Abingdon and Didcot. Whether you are replacing a gas, oil or electric system, the design starts with measuring how much heat each room loses on a cold day.
Heat pump services in Oxford
All services in Oxford:
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Oxford quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat pump guide prices in Oxford
The ranges below are typical installed prices for homes in Oxfordshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Oxford can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,900–£13,000 | £2,400–£5,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,900–£14,050 | £3,400–£6,550 |
| 3 bedroom semi or small detached | 6–9 kW | £12,500–£16,100 | £5,000–£8,600 |
| 4 bedroom detached | 8–12 kW | £14,550–£18,700 | £7,050–£11,200 |
| 5+ bedroom or larger older house | 11–16 kW | £17,150–£23,400 | £9,650–£15,900 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Oxford's winters
Oxford has about 7 hours 47 minutes of daylight at midwinter and 16 hours 41 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
Heat pumps in Oxford: questions
How long does installation take in Oxford?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for an Oxford home states the expected time.
What size heat pump does an Oxford home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Oxford home.
Do I need new radiators for a heat pump in Oxford?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Oxford home gives a room-by-room list.
How soon can you survey a home in Oxford?
Survey dates depend on how busy installers are in Oxfordshire. We offer the next available dates when you enquire and confirm them in writing.