- Area
- Oxfordshire
- Postcode district
- OX1
- Nation
- England
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Before you book: heat loss surveys in Oxford
The question for an Oxford home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
Houses in Oxford built in different eras can need very different heat pump sizes, which is why each is calculated room by room. For Oxford homes with extensions or loft conversions, each part of the house is assessed on its own construction.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Homes with an existing heat pump that seems undersized or expensive to run
- Self-builders and architects who need emitter and system sizes early
- Homeowners planning insulation or building work who want to know the effect on heat demand
What's included
- Written results in your quote, or a stand-alone report if you order one
- Hot water cylinder sizing for your household
- Room-by-room heat loss calculation using the MCS method
- Outdoor unit siting options and noise check
- Radiator schedule with any upgrades needed for each room
The survey in Oxford includes a check of where the outdoor unit could sit and how its sound would reach neighbours.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Oxford quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat loss survey prices in Oxford
Here are typical prices for heat loss surveys in Oxfordshire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £160–£420 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Winter daylight and heating in Oxford
Oxford has about 7 hours 47 minutes of daylight at midwinter and 16 hours 41 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
How installation works in Oxford
- Start online with a guide price or call us.
- A home survey in Oxford gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Heat loss surveys in Oxford: questions
Where would the outdoor unit go on an Oxford house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Oxford home.
Do I need new radiators for a heat pump in Oxford?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Oxford home gives a room-by-room list.
Do you cover Abingdon as well as Oxford?
Yes. We arrange surveys and installation in Abingdon, which is about 6 miles south of Oxford, and across Oxfordshire.
Can I use the heat loss report to get other quotes?
Yes. A stand-alone heat loss report is yours to use, including sharing it with other installers so their quotes are based on the same figures. Comparing quotes like for like makes it easier to see differences in equipment, radiator upgrades and workmanship terms. The report states the assumptions used wherever construction could not be confirmed.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.