A heat pump hot water cylinder is an insulated tank that stores hot water heated by the heat pump, with a much larger internal coil than a cylinder designed for a boiler. Heat pumps heat water to a lower temperature than boilers, typically around 45–55°C, so a bigger coil is needed to pass heat into the stored water quickly. A standard boiler cylinder would heat slowly and make the heat pump work harder than it should.
Older houses in Cambridgeshire with loft tanks can usually have them removed when an unvented cylinder is fitted. We check mains water pressure and flow at each Cambridgeshire property before choosing a cylinder. In terraced homes around Cambridgeshire and across Cambridgeshire, slimline cylinders can fit spaces a standard model cannot.
Who it suits
- Larger families or homes with two or more bathrooms
- Households with older vented cylinders and loft tanks who want mains-pressure showers
- Every air-to-water heat pump installation, whatever the existing boiler
- Homes replacing a combi boiler that need space found for a cylinder
Grants and rules for heat pumps in England
Homes in Cambridgeshire can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat pump hot water cylinders prices in Cambridgeshire
These are guide prices for Cambridgeshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Work | Guide price |
|---|---|
| Heat pump hot water cylinder (supplied and fitted) | £1,200–£2,250 |
Supplied and fitted, inc VAT. Included in every full system price.
Towns we cover in Cambridgeshire
We cover 9 towns in Cambridgeshire for heat pump hot water cylinders. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Peterborough | PE1 | Whittlesey | 7 h 38 min |
| Cambridge | CB2 | Royston | 7 h 42 min |
| Wisbech | PE13 | March | 7 h 37 min |
| St Neots | PE19 | Huntingdon | 7 h 42 min |
| Huntingdon | PE29 | St Neots | 7 h 41 min |
| March | PE15 | Wisbech | 7 h 39 min |
| Ely | CB6 | March | 7 h 40 min |
| Ramsey | PE26 | Whittlesey | 7 h 40 min |
| Whittlesey | PE7 | Peterborough | 7 h 38 min |
Heat pump hot water cylinders questions
How much does a heat pump cylinder cost?
A heat pump hot water cylinder has a guide price of £1,200–£2,200, installed and including VAT. In a full heat pump installation the cylinder is already included in the system guide price, so this figure mainly applies where a cylinder is replaced on its own. Capacity, coil design and the pipework needed affect where your price sits.
Will I run out of hot water with a heat pump?
Not if the cylinder is sized to how your household uses hot water. Unlike a combi, hot water is stored, so very heavy use, such as several long showers back to back, can use up the stored volume before it reheats. Sizing for your busiest period, and timing reheats sensibly, avoids this for most homes.
Do I need good water pressure for an unvented cylinder?
Yes. An unvented cylinder runs at mains pressure, so it needs enough incoming pressure and flow to supply your taps and showers well. We measure your mains supply at the survey. If flow is low, options include a different cylinder type or an upgrade to the incoming supply pipe, which we explain before you commit.
Can I keep my existing hot water cylinder with a heat pump?
Usually not. Cylinders designed for boilers have a small coil that cannot transfer heat quickly at heat pump temperatures, so the water would reheat slowly and efficiency would suffer. A heat pump cylinder has a much larger coil. The new cylinder can often go in the same cupboard, though, if there is enough height and floor space.