- Area
- Cheshire
- Postcode district
- CW12
- Nation
- England
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
What to know about heat loss surveys in Congleton
Homes around Congleton range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
For Congleton homes with extensions or loft conversions, each part of the house is assessed on its own construction. Design outdoor temperatures for Congleton and the wider Cheshire come from local cold-weather data, not a national average.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Homes with an existing heat pump that seems undersized or expensive to run
- Self-builders and architects who need emitter and system sizes early
- Homeowners planning insulation or building work who want to know the effect on heat demand
What's included
- Room-by-room heat loss calculation using the MCS method
- Electrical supply and network operator notes
- Recommended heat pump size and design flow temperature
- Written results in your quote, or a stand-alone report if you order one
- Outdoor unit siting options and noise check
Homeowners in Congleton thinking about insulation work can use the survey to see how it would change their heat pump size.
Grants and rules for heat pumps in England
Homes in Congleton can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Heat loss survey costs around Congleton
The ranges below are typical installed prices for homes in Cheshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Congleton can need quite different radiators and pipework.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Winter daylight and heating in Congleton
Congleton has about 7 hours 32 minutes of daylight at midwinter and 16 hours 58 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
From survey to switch-on in Congleton
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Congleton home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Heat loss surveys in Congleton: questions
How long does a heat pump survey take in Congleton?
A home survey in Congleton usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Do I need new radiators for a heat pump in Congleton?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Congleton home gives a room-by-room list.
What size heat pump does a Congleton home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Congleton home.
How long does a heat loss survey take?
A typical survey takes 1–3 hours on site, depending on the size and complexity of the home. Larger or older houses with mixed construction, extensions or many rooms take longer. The calculations and design are completed afterwards, and the results are included in your quote or stand-alone report.
Can I use the heat loss report to get other quotes?
Yes. A stand-alone heat loss report is yours to use, including sharing it with other installers so their quotes are based on the same figures. Comparing quotes like for like makes it easier to see differences in equipment, radiator upgrades and workmanship terms. The report states the assumptions used wherever construction could not be confirmed.