- Area
- Staffordshire
- Postcode district
- ST7
- Nation
- England
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Heat loss survey for Kidsgrove homes
The question for a Kidsgrove home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
The survey in Kidsgrove includes a check of where the outdoor unit could sit and how its sound would reach neighbours. Design outdoor temperatures for Kidsgrove and the wider Staffordshire come from local cold-weather data, not a national average.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Anyone getting a heat pump quote, as the first step
- Homes with an existing heat pump that seems undersized or expensive to run
- Landlords comparing properties before deciding where to switch first
What's included
- Electrical supply and network operator notes
- Outdoor unit siting options and noise check
- Written results in your quote, or a stand-alone report if you order one
- Radiator schedule with any upgrades needed for each room
- Hot water cylinder sizing for your household
For Kidsgrove homes with extensions or loft conversions, each part of the house is assessed on its own construction.
Grants and rules for heat pumps in England
Homes in Kidsgrove can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
What to budget for heat loss surveys in Kidsgrove
The ranges below are typical installed prices for homes in Staffordshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Kidsgrove can need quite different radiators and pipework.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Winter daylight and heating in Kidsgrove
On the shortest day Kidsgrove gets about 7 hours 33 minutes of daylight, with the noon sun around 13° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
From survey to switch-on in Kidsgrove
- Start online with a guide price or call us.
- A home survey in Kidsgrove gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Heat loss surveys in Kidsgrove: questions
What size heat pump does a Kidsgrove home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Kidsgrove home.
How long does installation take in Kidsgrove?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Kidsgrove home states the expected time.
Can you service a heat pump in Kidsgrove that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Kidsgrove, whoever fitted them. Tell us the make and model when you book.
Can I use the heat loss report to get other quotes?
Yes. A stand-alone heat loss report is yours to use, including sharing it with other installers so their quotes are based on the same figures. Comparing quotes like for like makes it easier to see differences in equipment, radiator upgrades and workmanship terms. The report states the assumptions used wherever construction could not be confirmed.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.