For installation enquiries the survey is free, and the results go straight into your written quote. If you want the calculation on its own, for example to plan building work or to compare quotes, a stand-alone heat loss survey and report has a guide price of £150–£400, including VAT.
Houses in County Armagh built in different eras can need very different heat pump sizes, which is why each is calculated room by room. A surveyor visits your home to measure each room, window and wall before any heat pump is sized. Homeowners in County Armagh thinking about insulation work can use the survey to see how it would change their heat pump size.
Who it suits
- Homes with an existing heat pump that seems undersized or expensive to run
- Anyone getting a heat pump quote, as the first step
- Self-builders and architects who need emitter and system sizes early
- Homeowners planning insulation or building work who want to know the effect on heat demand
Grants and rules for heat pumps in Northern Ireland
The Boiler Upgrade Scheme covers England and Wales only, and there is currently no dedicated heat pump grant for homeowners in Northern Ireland. Our quote for a home in County Armagh is therefore shown without a grant deduction; if support becomes available we will tell you how it applies.
There is no VAT on installing a heat pump in Northern Ireland until 31 March 2027, the same as in Great Britain. Planning and building control here follow Northern Ireland's own rules, so the survey checks the unit position against them.
Heat loss survey prices in County Armagh
Here are typical prices for heat loss surveys in County Armagh, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£390 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Towns we cover in County Armagh
We cover 6 towns in County Armagh for heat loss surveys. Each links to local guide prices and the grant position for Northern Ireland.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Craigavon | BT64 | Lurgan | 7 h 17 min |
| Portadown | BT62 | Craigavon | 7 h 17 min |
| Armagh | BT61 | Keady | 7 h 18 min |
| Keady | BT60 | Armagh | 7 h 19 min |
| Lurgan | BT66 | Craigavon | 7 h 17 min |
| Tandragee | BT63 | Portadown | 7 h 18 min |
Heat loss surveys questions
Why can't you size the heat pump from my boiler?
Boilers are often much larger than a home's real heat loss, because they are sized for fast hot water and quick warm-ups. Matching a heat pump to the boiler's output usually means an oversized unit that costs more and switches on and off too often. A room-by-room calculation finds the actual heat demand, which is what the heat pump needs to meet.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.
How long does a heat loss survey take?
A typical survey takes 1–3 hours on site, depending on the size and complexity of the home. Larger or older houses with mixed construction, extensions or many rooms take longer. The calculations and design are completed afterwards, and the results are included in your quote or stand-alone report.