- Area
- Greater Manchester
- Postcode district
- BL1
- Nation
- England
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Heat loss survey in Bolton: what to expect
In Bolton, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
Houses in Bolton built in different eras can need very different heat pump sizes, which is why each is calculated room by room. Design outdoor temperatures for Bolton and the wider Greater Manchester come from local cold-weather data, not a national average.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Landlords comparing properties before deciding where to switch first
- Homeowners planning insulation or building work who want to know the effect on heat demand
- Self-builders and architects who need emitter and system sizes early
What's included
- Outdoor unit siting options and noise check
- Radiator schedule with any upgrades needed for each room
- Electrical supply and network operator notes
- Written results in your quote, or a stand-alone report if you order one
- Room-by-room heat loss calculation using the MCS method
A surveyor visits your Bolton home to measure each room, window and wall before any heat pump is sized.
Grants and rules for heat pumps in England
Homes in Bolton can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
What to budget for heat loss surveys in Bolton
Here are typical prices for heat loss surveys in Greater Manchester, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£390 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Short winter days in Bolton and what they mean
On the shortest day Bolton gets only about 7 hours 27 minutes of daylight and the noon sun sits around 13° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
What happens after you enquire in Bolton?
- Start online with a guide price or call us.
- A home survey in Bolton gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Heat loss surveys in Bolton: questions
How long does installation take in Bolton?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Bolton home states the expected time.
Do I need new radiators for a heat pump in Bolton?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Bolton home gives a room-by-room list.
Can you service a heat pump in Bolton that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Bolton, whoever fitted them. Tell us the make and model when you book.
How long does a heat loss survey take?
A typical survey takes 1–3 hours on site, depending on the size and complexity of the home. Larger or older houses with mixed construction, extensions or many rooms take longer. The calculations and design are completed afterwards, and the results are included in your quote or stand-alone report.
Is the heat loss survey free?
Yes, for installation enquiries the home survey and heat loss calculation are free, and the results form the basis of your written quote. If you only want the calculation and report, for example for building plans or comparing quotes, a stand-alone heat loss survey has a guide price of £150–£400, including VAT. We confirm which applies when you book.