- Area
- Lancashire
- Postcode district
- BB10
- Nation
- England
- Guide price
- Priced after survey
- Survey
- Free for installation enquiries
Before you book: heat loss surveys in Burnley
Homes around Burnley range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
Design outdoor temperatures for Burnley and the wider Lancashire come from local cold-weather data, not a national average. For Burnley homes with extensions or loft conversions, each part of the house is assessed on its own construction.
Every heat pump we quote starts with a room-by-room heat loss survey, free with installation enquiries and also available as a stand-alone report.
- Anyone getting a heat pump quote, as the first step
- Landlords comparing properties before deciding where to switch first
- Self-builders and architects who need emitter and system sizes early
What's included
- Hot water cylinder sizing for your household
- Room-by-room heat loss calculation using the MCS method
- Outdoor unit siting options and noise check
- Recommended heat pump size and design flow temperature
- Written results in your quote, or a stand-alone report if you order one
Homeowners in Burnley thinking about insulation work can use the survey to see how it would change their heat pump size.
Grants and rules for heat pumps in England
Homes in Burnley can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
What to budget for heat loss surveys in Burnley
Guide prices for Burnley and the rest of Lancashire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£390 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Short winter days in Burnley and what they mean
On the shortest day Burnley gets only about 7 hours 24 minutes of daylight and the noon sun sits around 13° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
How installation works in Burnley
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Burnley; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Heat loss surveys in Burnley: questions
How soon can you survey a home in Burnley?
Survey dates depend on how busy installers are in Lancashire. We offer the next available dates when you enquire and confirm them in writing.
How long does a heat pump survey take in Burnley?
A home survey in Burnley usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Where would the outdoor unit go on a Burnley house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Burnley home.
Why can't you size the heat pump from my boiler?
Boilers are often much larger than a home's real heat loss, because they are sized for fast hot water and quick warm-ups. Matching a heat pump to the boiler's output usually means an oversized unit that costs more and switches on and off too often. A room-by-room calculation finds the actual heat demand, which is what the heat pump needs to meet.
Can I use the heat loss report to get other quotes?
Yes. A stand-alone heat loss report is yours to use, including sharing it with other installers so their quotes are based on the same figures. Comparing quotes like for like makes it easier to see differences in equipment, radiator upgrades and workmanship terms. The report states the assumptions used wherever construction could not be confirmed.