A heat loss survey is a room-by-room assessment that calculates how much heat your home loses on a cold day, which tells you what size of heat pump you need and whether your radiators can deliver enough warmth. It follows the MCS method, the standard used for heat pump design across the UK, and it is the foundation for every other decision in your quote.
A surveyor visits your home to measure each room, window and wall before any heat pump is sized. Design outdoor temperatures for Lancashire and the wider Lancashire come from local cold-weather data, not a national average. The survey in Lancashire includes a check of where the outdoor unit could sit and how its sound would reach neighbours.
Who it suits
- Self-builders and architects who need emitter and system sizes early
- Anyone getting a heat pump quote, as the first step
- Landlords comparing properties before deciding where to switch first
- Homes with an existing heat pump that seems undersized or expensive to run
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat loss survey prices in Lancashire
These are guide prices for Lancashire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£390 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Towns we cover in Lancashire
We cover 21 towns in Lancashire for heat loss surveys. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Preston | PR1 | Leyland | 7 h 25 min |
| Burnley | BB10 | Colne | 7 h 24 min |
| Blackburn | BB2 | Darwen | 7 h 25 min |
| Blackpool | FY1 | Poulton-le-Fylde | 7 h 24 min |
| Morecambe | LA4 | Lancaster | 7 h 21 min |
| Lancaster | LA1 | Morecambe | 7 h 22 min |
| Lytham St Annes | FY8 | Blackpool | 7 h 25 min |
| Skelmersdale | WN8 | Ormskirk | 7 h 27 min |
| Leyland | PR25 | Chorley | 7 h 26 min |
| Accrington | BB5 | Rawtenstall | 7 h 25 min |
| Chorley | PR6 | Leyland | 7 h 26 min |
| Darwen | BB3 | Blackburn | 7 h 26 min |
| Thornton-Cleveleys | FY5 | Poulton-le-Fylde | 7 h 24 min |
| Fleetwood | FY7 | Thornton-Cleveleys | 7 h 23 min |
| Ormskirk | L39 | Skelmersdale | 7 h 27 min |
| Rawtenstall | BB4 | Accrington | 7 h 26 min |
| Colne | BB8 | Burnley | 7 h 24 min |
| Poulton-le-Fylde | FY3 | Blackpool | 7 h 24 min |
| Carnforth | LA5 | Lancaster | 7 h 21 min |
| Clitheroe | BB7 | Accrington | 7 h 24 min |
| Garstang | PR3 | Poulton-le-Fylde | 7 h 23 min |
Heat loss surveys questions
Can I use the heat loss report to get other quotes?
Yes. A stand-alone heat loss report is yours to use, including sharing it with other installers so their quotes are based on the same figures. Comparing quotes like for like makes it easier to see differences in equipment, radiator upgrades and workmanship terms. The report states the assumptions used wherever construction could not be confirmed.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.
How long does a heat loss survey take?
A typical survey takes 1–3 hours on site, depending on the size and complexity of the home. Larger or older houses with mixed construction, extensions or many rooms take longer. The calculations and design are completed afterwards, and the results are included in your quote or stand-alone report.
Is the heat loss survey free?
Yes, for installation enquiries the home survey and heat loss calculation are free, and the results form the basis of your written quote. If you only want the calculation and report, for example for building plans or comparing quotes, a stand-alone heat loss survey has a guide price of £150–£400, including VAT. We confirm which applies when you book.