A heat loss survey is a room-by-room assessment that calculates how much heat your home loses on a cold day, which tells you what size of heat pump you need and whether your radiators can deliver enough warmth. It follows the MCS method, the standard used for heat pump design across the UK, and it is the foundation for every other decision in your quote.
The survey in Renfrewshire and Inverclyde includes a check of where the outdoor unit could sit and how its sound would reach neighbours. Houses in Renfrewshire and Inverclyde built in different eras can need very different heat pump sizes, which is why each is calculated room by room. Design outdoor temperatures for Renfrewshire and Inverclyde and the wider Renfrewshire and Inverclyde come from local cold-weather data, not a national average.
Who it suits
- Anyone getting a heat pump quote, as the first step
- Homes with an existing heat pump that seems undersized or expensive to run
- Landlords comparing properties before deciding where to switch first
- Self-builders and architects who need emitter and system sizes early
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a home in Renfrewshire and Inverclyde, apply and receive the written offer before the installation date is fixed.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your property at survey.
Heat loss survey prices in Renfrewshire and Inverclyde
Here are typical prices for heat loss surveys in Renfrewshire and Inverclyde, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£400 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Towns we cover in Renfrewshire and Inverclyde
We cover 10 towns in Renfrewshire and Inverclyde for heat loss surveys. Each links to local guide prices and the grant position for Scotland.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Paisley | PA2 | Barrhead | 6 h 59 min |
| Greenock | PA15 | Gourock | 6 h 57 min |
| Newton Mearns | G77 | Barrhead | 7 h 00 min |
| Renfrew | PA4 | Erskine | 6 h 58 min |
| Barrhead | G78 | Paisley | 6 h 59 min |
| Johnstone | PA5 | Bridge of Weir | 6 h 59 min |
| Erskine | PA8 | Renfrew | 6 h 58 min |
| Bridge of Weir | PA11 | Johnstone | 6 h 59 min |
| Gourock | PA19 | Greenock | 6 h 57 min |
| Port Glasgow | PA14 | Greenock | 6 h 58 min |
Heat loss surveys questions
How long does a heat loss survey take?
A typical survey takes 1–3 hours on site, depending on the size and complexity of the home. Larger or older houses with mixed construction, extensions or many rooms take longer. The calculations and design are completed afterwards, and the results are included in your quote or stand-alone report.
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.
Is the heat loss survey free?
Yes, for installation enquiries the home survey and heat loss calculation are free, and the results form the basis of your written quote. If you only want the calculation and report, for example for building plans or comparing quotes, a stand-alone heat loss survey has a guide price of £150–£400, including VAT. We confirm which applies when you book.
Why can't you size the heat pump from my boiler?
Boilers are often much larger than a home's real heat loss, because they are sized for fast hot water and quick warm-ups. Matching a heat pump to the boiler's output usually means an oversized unit that costs more and switches on and off too often. A room-by-room calculation finds the actual heat demand, which is what the heat pump needs to meet.