Heat pumps work differently from boilers. A boiler typically heats a home in bursts, switching on hard for a few hours in the morning and evening. A heat pump is usually most efficient running 'low and slow': keeping water at a modest temperature for longer and holding rooms at a steady temperature rather than reheating them from cold. Many people find this takes a week or two to get used to.
We set up weather compensation for each Bristol home from its own heat loss design, not a factory default. For Bristol homes with extensions, we plan zones so the new space heats properly without making the heat pump cycle. Homeowners in Bristol get a walkthrough of their controls at handover, with a simple written guide to keep.
Who it suits
- Homes with an extension, loft room or areas heated at different times
- Homes with solar PV or a battery that want hot water timed to match
- Households considering a heat pump or time-of-use electricity tariff
- Every new heat pump installation, set up at commissioning
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Prices
Weather-compensating controls and set-up are included in every full system price. See the guide prices for full systems.
Towns we cover in Bristol
We cover 6 towns in Bristol for heat pump controls and tariffs. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Bristol | BS1 | Clifton | 7 h 50 min |
| Bedminster | BS3 | Bristol | 7 h 50 min |
| Bishopston | BS7 | Westbury-on-Trym | 7 h 50 min |
| Clifton | BS8 | Bristol | 7 h 50 min |
| Fishponds | BS16 | Bishopston | 7 h 50 min |
| Westbury-on-Trym | BS9 | Bishopston | 7 h 50 min |
Heat pump controls and tariffs questions
What flow temperature should my heat pump run at?
It depends on the design: the flow temperature is set so your radiators or underfloor heating can heat each room on a cold day. Well-designed systems typically run at around 35–50°C at their coldest, and lower in milder weather through weather compensation. Your design paperwork states the design flow temperature, and we set the heating curve to match it.
Is a heat pump tariff a good idea?
A heat pump or time-of-use tariff can lower running costs if your household can shift hot water heating and some space heating into the cheaper periods. Whether it suits you depends on the rates, the standing charge, your routine and whether you have a battery. Compare the total expected cost on your own usage, not only the headline rate.
How should I set the hot water on a heat pump?
Most households heat hot water once or twice a day at set times rather than on demand. Timing the main heat for a cheaper tariff period, or for the middle of the day when solar panels generate, helps keep costs down. A weekly legionella cycle raises the water temperature higher, and we schedule it at a sensible time.
Should I turn my heat pump off at night?
Usually not. Switching off lets the house cool, and the heat pump then has to run at a higher flow temperature to recover, which lowers efficiency. A small set-back of 1–2°C overnight is generally more economical. Homes with very good insulation or a time-of-use tariff may suit different patterns, which we can set up.