We set up the controls at commissioning to suit your home and routine, show you how to use them, and explain how a heat pump tariff or time-of-use tariff could fit. Settings can be fine-tuned after the first cold spell, once you have seen how the house responds.
We set up weather compensation for each Wiltshire home from its own heat loss design, not a factory default. For Wiltshire homes with extensions, we plan zones so the new space heats properly without making the heat pump cycle. Homeowners in Wiltshire get a walkthrough of their controls at handover, with a simple written guide to keep.
Who it suits
- Homes with an extension, loft room or areas heated at different times
- Households considering a heat pump or time-of-use electricity tariff
- Every new heat pump installation, set up at commissioning
- Homes with solar PV or a battery that want hot water timed to match
Grants and rules for heat pumps in England
Homes in Wiltshire can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Prices
Weather-compensating controls and set-up are included in every full system price. See the guide prices for full systems.
Towns we cover in Wiltshire
We cover 12 towns in Wiltshire for heat pump controls and tariffs. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Swindon | SN1 | Marlborough | 7 h 49 min |
| Salisbury | SP1 | Amesbury | 7 h 54 min |
| Trowbridge | BA14 | Bradford-on-Avon | 7 h 51 min |
| Chippenham | SN15 | Corsham | 7 h 50 min |
| Melksham | SN12 | Corsham | 7 h 51 min |
| Warminster | BA12 | Trowbridge | 7 h 53 min |
| Calne | SN11 | Chippenham | 7 h 50 min |
| Devizes | SN10 | Calne | 7 h 51 min |
| Amesbury | SP4 | Salisbury | 7 h 53 min |
| Bradford-on-Avon | BA15 | Trowbridge | 7 h 51 min |
| Corsham | SN13 | Chippenham | 7 h 50 min |
| Marlborough | SN8 | Swindon | 7 h 50 min |
Heat pump controls and tariffs questions
Is a heat pump tariff a good idea?
A heat pump or time-of-use tariff can lower running costs if your household can shift hot water heating and some space heating into the cheaper periods. Whether it suits you depends on the rates, the standing charge, your routine and whether you have a battery. Compare the total expected cost on your own usage, not only the headline rate.
What flow temperature should my heat pump run at?
It depends on the design: the flow temperature is set so your radiators or underfloor heating can heat each room on a cold day. Well-designed systems typically run at around 35–50°C at their coldest, and lower in milder weather through weather compensation. Your design paperwork states the design flow temperature, and we set the heating curve to match it.
Can I control my heat pump from my phone?
Many heat pumps offer an app or work with smart thermostats, letting you change temperatures, set schedules and see energy use from your phone. Features vary by make and model, and app control usually needs a reliable internet connection at home. The heating keeps running on its own settings if the connection drops.
Why are my radiators only warm, not hot?
That is normal for a heat pump. It heats radiators to a lower temperature than a boiler, so they feel warm rather than hot to the touch, while running longer to keep the room at a steady temperature. If rooms reach the temperature you set, the system is working as designed. If a room stays cold, the settings or radiator size may need checking.