Every air-to-water heat pump installation needs a cylinder, because there is no heat pump equivalent of a combi boiler that heats water instantly. If you have a combi now, the main design question is where the cylinder will go. If you already have a cylinder, it will almost always need replacing with a heat pump model, though the same cupboard can often be reused if it is large enough.
In terraced homes around Lanarkshire and across Lanarkshire, slimline cylinders can fit spaces a standard model cannot. Discharge pipe routes are planned at the survey so a Lanarkshire cylinder can drain safely to the outside. Cylinder sizes for Lanarkshire homes are based on the people living there and the bathrooms in daily use.
Who it suits
- Homes with solar PV that want to store daytime electricity as hot water
- Larger families or homes with two or more bathrooms
- Homes replacing a combi boiler that need space found for a cylinder
- Every air-to-water heat pump installation, whatever the existing boiler
Grants and rules for heat pumps in Scotland
The Boiler Upgrade Scheme does not apply in Scotland. Instead, homeowners in Lanarkshire can apply to Home Energy Scotland for a grant of up to £7,500 towards a heat pump, with up to £1,500 more for eligible rural and island homes, plus an optional interest-free loan of up to £7,500. You need a written funding offer before any work starts.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your property at survey.
Heat pump hot water cylinders prices in Lanarkshire
Here are typical prices for heat pump hot water cylinders in Lanarkshire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Work | Guide price |
|---|---|
| Heat pump hot water cylinder (supplied and fitted) | £1,200–£2,200 |
Supplied and fitted, inc VAT. Included in every full system price.
Towns we cover in Lanarkshire
We cover 13 towns in Lanarkshire for heat pump hot water cylinders. Each links to local guide prices and the grant position for Scotland.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| East Kilbride | G74 | Cambuslang | 7 h 00 min |
| Hamilton | ML3 | Motherwell | 7 h 00 min |
| Cumbernauld | G67 | Airdrie | 6 h 57 min |
| Coatbridge | ML5 | Airdrie | 6 h 59 min |
| Airdrie | ML6 | Coatbridge | 6 h 59 min |
| Motherwell | ML1 | Bellshill | 7 h 00 min |
| Rutherglen | G73 | Cambuslang | 6 h 59 min |
| Cambuslang | G73 | Rutherglen | 6 h 59 min |
| Wishaw | ML2 | Motherwell | 7 h 00 min |
| Bellshill | ML4 | Motherwell | 6 h 59 min |
| Carluke | ML8 | Wishaw | 7 h 00 min |
| Lanark | ML11 | Carluke | 7 h 01 min |
| Strathaven | ML10 | Hamilton | 7 h 01 min |
Heat pump hot water cylinders questions
I have a combi boiler. Where will the cylinder go?
Moving from a combi to a heat pump means finding space for a cylinder, usually somewhere around 600 mm square and up to about 2 m tall. Common choices are a bedroom or landing cupboard, a utility room, under the stairs or an integral garage. The surveyor looks at your layout and suggests options, including slimline models where space is tight.
Will I run out of hot water with a heat pump?
Not if the cylinder is sized to how your household uses hot water. Unlike a combi, hot water is stored, so very heavy use, such as several long showers back to back, can use up the stored volume before it reheats. Sizing for your busiest period, and timing reheats sensibly, avoids this for most homes.
Can I keep my existing hot water cylinder with a heat pump?
Usually not. Cylinders designed for boilers have a small coil that cannot transfer heat quickly at heat pump temperatures, so the water would reheat slowly and efficiency would suffer. A heat pump cylinder has a much larger coil. The new cylinder can often go in the same cupboard, though, if there is enough height and floor space.
Does a heat pump cylinder need servicing?
Yes. An unvented cylinder's safety devices should be checked every year, including the relief valves, the expansion vessel charge and the discharge pipework. This is normally done as part of the annual heat pump service, and it is often a condition of the cylinder manufacturer's warranty. Keep the cylinder paperwork with your heat pump handover documents.