A heat pump radiator upgrade means replacing only the radiators that are too small to heat their room at the lower water temperatures a heat pump runs at. A gas boiler usually sends water to radiators at 60–75°C, while a well-designed heat pump system typically runs at around 35–50°C. Cooler water gives out less heat from the same radiator, so some rooms need more radiator surface to stay comfortable.
Many older houses in West Yorkshire still have their original single-panel radiators, so the survey checks each one against the room it heats. In West Yorkshire, bay-windowed front rooms are often the rooms that need a larger radiator when moving to a heat pump. We plan radiator upgrades in West Yorkshire so floorboards are lifted only where pipework genuinely needs changing.
Who it suits
- Rooms with little wall space, where a fan-assisted radiator fits better
- Rooms that already feel slow to heat, such as bay-windowed living rooms
- Homes switching from a gas, oil or LPG boiler to a heat pump
- Homeowners who want the lowest practical flow temperature for efficiency
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat pump radiators prices in West Yorkshire
The ranges below are typical installed prices for homes in West Yorkshire, including VAT. A survey sets the exact figure, because two similar-looking houses in West Yorkshire can need quite different radiators and pipework.
| Work | Guide price |
|---|---|
| Replacement radiator, sized for a heat pump (each, fitted) | £240–£440 |
| Upgrade of about 10 radiators | £1,950–£4,900 |
| Pipework upgrade (e.g. microbore to larger bore) | £1,450–£3,450 |
Installed, inc VAT. The survey lists which radiators need changing.
Towns we cover in West Yorkshire
We cover 20 towns in West Yorkshire for heat pump radiator upgrades. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Leeds | LS1 | Morley | 7 h 25 min |
| Bradford | BD1 | Cleckheaton | 7 h 25 min |
| Huddersfield | HD1 | Brighouse | 7 h 26 min |
| Wakefield | WF1 | Ossett | 7 h 26 min |
| Halifax | HX3 | Brighouse | 7 h 25 min |
| Dewsbury | WF12 | Ossett | 7 h 26 min |
| Morley | LS27 | Dewsbury | 7 h 25 min |
| Keighley | BD21 | Bingley | 7 h 24 min |
| Castleford | WF10 | Pontefract | 7 h 25 min |
| Pontefract | WF8 | Castleford | 7 h 26 min |
| Yeadon | LS19 | Guiseley | 7 h 24 min |
| Brighouse | HD6 | Halifax | 7 h 26 min |
| Cleckheaton | BD19 | Liversedge | 7 h 25 min |
| Ossett | WF5 | Dewsbury | 7 h 26 min |
| Guiseley | LS20 | Yeadon | 7 h 24 min |
| Liversedge | WF15 | Cleckheaton | 7 h 26 min |
| Horsforth | LS18 | Yeadon | 7 h 24 min |
| South Elmsall | WF9 | Pontefract | 7 h 27 min |
| Mirfield | WF14 | Liversedge | 7 h 26 min |
| Bingley | BD16 | Keighley | 7 h 24 min |
Heat pump radiator upgrades questions
Will new radiators be much bigger than my old ones?
Sometimes, but not always. Swapping a single-panel radiator for a double or triple-panel model of the same height and width can raise output substantially, adding only depth from the wall. Where that is not enough, a longer or taller radiator, or a second radiator in the room, may be needed. We agree sizes and positions with you before anything is ordered.
Can I keep my radiators and just run the heat pump hotter?
You can, but it usually costs more to run. Every extra degree of flow temperature reduces a heat pump's efficiency, so a system designed at 55°C uses noticeably more electricity than one at 45°C for the same heat. A few well-chosen radiator upgrades often let the whole house run cooler, which is the better long-term trade.
Can radiators be changed without draining the whole system?
Radiator changes normally mean draining the heating system, which is why they are usually done as part of the heat pump installation. The system is then refilled, flushed, treated with inhibitor and balanced. Doing the radiators at the same time avoids draining twice and means the new radiators are commissioned with the heat pump.
Are fan-assisted radiators noisy?
Fan-assisted radiators make a low, steady fan sound when running at higher output, and many have quieter settings for bedrooms at night. They are useful where wall space is short, such as a kitchen with few clear walls. They need a small electrical supply, which we plan into the installation if you choose them.