- Area
- West Yorkshire
- Postcode district
- WF15
- Nation
- England
- Guide price
- From £240 inc VAT
- Survey
- Free for installation enquiries
Heat pump radiators for Liversedge homes
Every property in Liversedge is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Many older houses in Liversedge still have their original single-panel radiators, so the survey checks each one against the room it heats. We plan radiator upgrades in Liversedge so floorboards are lifted only where pipework genuinely needs changing.
We size each radiator to your room-by-room heat loss so a heat pump can heat your home at a low, efficient flow temperature.
- Homes switching from a gas, oil or LPG boiler to a heat pump
- Extensions and loft conversions with large areas of glazing
- Homeowners who want the lowest practical flow temperature for efficiency
What's included
- Balancing every radiator so each room heats evenly
- A radiator schedule showing which radiators stay, which change and their outputs
- Pipework checks and any agreed pipe upgrades
- Draining, refilling, cleaning and inhibitor treatment of the heating system
- Making good around brackets and pipe routes, with any decorating agreed in your quote
Extensions and kitchen-diners around Liversedge with large glazed areas get their own radiator calculation.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Liversedge quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Heat pump radiators costs around Liversedge
Here are typical prices for heat pump radiator upgrades in West Yorkshire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Work | Guide price |
|---|---|
| Replacement radiator, sized for a heat pump (each, fitted) | £240–£440 |
| Upgrade of about 10 radiators | £1,950–£4,900 |
| Pipework upgrade (e.g. microbore to larger bore) | £1,450–£3,450 |
Installed, inc VAT. The survey lists which radiators need changing.
Designing for Liversedge's winters
Liversedge sees roughly 7 hours 26 minutes of daylight in December and 17 hours 05 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
How installation works in Liversedge
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Liversedge; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Heat pump radiator upgrades in Liversedge: questions
How long does a heat pump survey take in Liversedge?
A home survey in Liversedge usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
What size heat pump does a Liversedge home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Liversedge home.
How long does installation take in Liversedge?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Liversedge home states the expected time.
Do I need new radiators for a heat pump?
Not necessarily: many homes keep most of their radiators and replace only a few. The heat loss survey checks each room against its existing radiator at the planned flow temperature. Rooms with large windows, high ceilings or extensions are the usual candidates for an upgrade, while bedrooms often need no change. Your radiator schedule lists every decision.
Will new radiators be much bigger than my old ones?
Sometimes, but not always. Swapping a single-panel radiator for a double or triple-panel model of the same height and width can raise output substantially, adding only depth from the wall. Where that is not enough, a longer or taller radiator, or a second radiator in the room, may be needed. We agree sizes and positions with you before anything is ordered.