- Area
- Berkshire
- Postcode district
- RG1
- Nation
- England
- Guide price
- From £100 inc VAT
- Visit
- Rate agreed in advance
What to know about heat pump repairs in Reading
A heat pump that is serviced and set up properly keeps running efficiently for many years. Many heat pump faults trace back to settings, low pressure or a worn part rather than the heat pump itself, and those can usually be put right.
Outdoor units in exposed spots around Reading can ice more heavily, so siting is checked as part of any icing fault. Heat pump owners in Reading can arrange a fault-finding visit at a rate agreed before an engineer attends.
When a heat pump shows an error, loses pressure or stops heating, an engineer diagnoses the cause and explains the repair and its cost before fixing it.
- Systems losing pressure or needing frequent topping up
- Outdoor units that have become noisy, iced up or keep switching on and off
- Heat pumps installed by another company that need a second opinion
What's included
- A clear explanation of the fault and a price for the repair before work goes ahead
- Reading of error history and operating data
- Fault-finding visit at a rate agreed before attending
- Refrigerant repairs by an F-gas certified engineer where needed
- Testing of sensors, pumps, valves, pressures and electrics
We repair heat pumps in Reading whoever installed them, including older monobloc and split systems.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Reading quote.
What to budget for heat pump repairs in Reading
These are guide prices including VAT. The rate for your visit in Reading is confirmed before we book it, and any repair is priced in writing before parts are ordered.
| Repair | Guide price |
|---|---|
| Fault-finding visit and diagnosis | £100–£190 |
| Sensor or thermistor replacement | £130–£300 |
| Expansion vessel or pressure relief valve | £160–£370 |
| Circulating pump replacement | £260–£510 |
| Fan motor replacement | £320–£690 |
| Refrigerant leak repair and re-gas (split systems) | £370–£1,000 |
| Main control board (PCB) replacement | £480–£1,150 |
Inc VAT. The fault-finding rate is agreed before we attend; repairs are priced in writing before parts are ordered.
Short winter days in Reading and what they mean
Reading sees roughly 7 hours 50 minutes of daylight in late December against 16 hours 38 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
How a visit works in Reading
- Tell us the make if you know it, the error code or symptoms, and send photos of the unit and controller.
- We confirm the fault-finding rate and arrange a visit in Reading.
- The engineer diagnoses the fault and gives you a written price for the repair.
- Parts are ordered once you agree, and the repair is completed and tested.
Heat pump repairs in Reading: questions
How much does a visit cost in Reading?
The rate for a service or fault-finding visit is agreed before anyone attends. Any repair is priced in writing before parts are ordered, so you decide before work goes ahead.
Do you also cover Lower Earley?
Yes. We arrange heat pump servicing and repairs in Lower Earley, which is about 3 miles south-east of Reading, and across Berkshire.
Can you work on a heat pump in Reading that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Reading, whoever fitted them. Tell us the make and model when you get in touch.
Why is my heat pump showing an error code?
An error code is the heat pump's way of reporting a problem it has detected, such as low water flow, a sensor reading out of range or a communication fault between units. Note the code and check the manual, as some codes clear after a simple reset or pressure top-up. If it returns, an engineer can trace the underlying cause.
Why does my heat pump keep switching on and off?
Frequent starting and stopping, called short cycling, is usually caused by an oversized heat pump, low water flow, too many zones closing at once or controls set with too narrow a range. It reduces efficiency and wears components. An engineer can check the settings, flow rates and design, and can often improve it with control changes before any parts are needed.