Not every replacement is about age. Some heat pumps were sized by rule of thumb, paired with radiators that are too small or set up without weather compensation, leaving homes cold or bills high. Replacing the unit alone will not fix those problems, so we start with a fresh heat loss survey and check the radiators, pipework, cylinder and controls.
Homes in Clwyd with a heat pump that never kept them warm can have the whole design checked before a new unit is chosen. Across Clwyd and Clwyd, old units are removed with their refrigerant recovered by an F-gas certified engineer. New outdoor units in Clwyd may differ in size from the old one, so the base and position are checked at survey.
Who it suits
- Older units where parts are becoming hard to source
- Units that have failed with a major fault, such as a compressor failure
- Systems that were undersized and struggle in cold weather
- Heat pumps nearing the end of their typical life with rising repair costs
Grants and rules for heat pumps in Wales
Homes in Clwyd can use the Boiler Upgrade Scheme, which applies in Wales as well as England: £7,500 towards an air source heat pump, or £9,000 when it replaces oil or LPG heating for installations from 21 July 2026 to 31 March 2027. The MCS-certified installer named in your quote applies and deducts the grant.
Heat pump replacement prices in Clwyd
Guide prices for Clwyd, including VAT. We agree the visit rate before anyone attends, so there are no surprises on the day.
| Work | Installed guide price |
|---|---|
| Replacing an old outdoor unit like-for-like | £6,000–£9,500 |
| Full system replacement, 2–3 bedroom terrace or semi | £10,500–£13,500 |
| Full system replacement, 3 bedroom semi or small detached | £12,000–£15,500 |
| Full system replacement, 4 bedroom detached | £14,000–£18,000 |
Installed, inc VAT. Grant funding rarely applies to replacing a heat pump, so these prices are shown without any deduction; we check eligibility at survey.
Towns we cover in Clwyd
We cover 16 towns in Clwyd for heat pump replacement. Each links to local guide prices and the grant position for Wales.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Wrexham | LL13 | Rhosllannerchrugog | 7 h 33 min |
| Buckley | CH7 | Mold | 7 h 32 min |
| Deeside | CH5 | Connah's Quay | 7 h 31 min |
| Colwyn Bay | LL29 | Conwy | 7 h 30 min |
| Flint | CH6 | Connah's Quay | 7 h 31 min |
| Rhyl | LL18 | Prestatyn | 7 h 30 min |
| Rhosllannerchrugog | LL14 | Wrexham | 7 h 33 min |
| Prestatyn | LL19 | Rhyl | 7 h 30 min |
| Llandudno | LL30 | Conwy | 7 h 30 min |
| Abergele | LL22 | Rhyl | 7 h 30 min |
| Connah's Quay | CH5 | Deeside | 7 h 31 min |
| Conwy | LL31 | Llandudno | 7 h 30 min |
| Denbigh | LL16 | Ruthin | 7 h 32 min |
| Llangollen | LL20 | Rhosllannerchrugog | 7 h 34 min |
| Mold | CH7 | Buckley | 7 h 32 min |
| Ruthin | LL15 | Denbigh | 7 h 32 min |
Heat pump replacement questions
How long does an air source heat pump last?
Air source heat pumps typically last 15–20 years, depending on the quality of the original design, how hard the unit has worked, where it is sited and how well it has been serviced. Units that short cycle or run at high flow temperatures for years may wear sooner. Annual servicing helps components last and spots problems early.
How much does it cost to replace a heat pump?
Replacing an old outdoor unit like-for-like has a guide price of £6,000–£9,500, installed and including VAT. Re-sizing, a new cylinder, radiator upgrades or new controls add to that, and each is itemised in your written quote. The final price is fixed after a survey, once we know what the existing system needs.
Will a new heat pump fit where the old one was?
Sometimes. A new unit may be a different size, weight or shape and may have different clearance requirements, so the existing base and position are checked at survey. The MCS noise assessment is carried out for the new unit, and a different position may be suggested if it improves performance or reduces sound at neighbouring windows.
What happens to my old heat pump?
The old outdoor unit is removed and disposed of responsibly. Its refrigerant is recovered first, which must be done by an F-gas certified engineer, and metals and components are recycled where facilities allow. If the old cylinder or controls are replaced too, they are removed at the same time, and pipework that is no longer needed is capped or taken out.