Our coverage in Clwyd runs from Wrexham, Buckley, Deeside and Colwyn Bay and the villages around them. The approach is the same everywhere: survey, design, a written quote, then installation by installers working under our contract.
Towns we cover in Clwyd
Heat pump services in Clwyd
Grants and rules for heat pumps in Wales
Homes in Clwyd can use the Boiler Upgrade Scheme, which applies in Wales as well as England: £7,500 towards an air source heat pump, or £9,000 when it replaces oil or LPG heating for installations from 21 July 2026 to 31 March 2027. The MCS-certified installer named in your quote applies and deducts the grant.
There is no VAT on installing a heat pump anywhere in the UK, Wales included, until 31 March 2027. Planning rules for heat pumps in Wales are set by the Welsh Government and differ from England's, so the surveyor checks the unit position against them.
Guide prices in Clwyd
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Questions
Can I keep my boiler and add a heat pump?
Yes, you can keep your boiler and add a heat pump as a hybrid system, where the heat pump usually handles most of the heating and the boiler helps on the coldest days or with hot water. A hybrid system is a guide price of £7,000–£11,000, installed and including VAT. Hybrid systems are not eligible for the Boiler Upgrade Scheme in England and Wales, so we compare both options with you at survey. See hybrid heat pumps.
How long does a heat pump installation take?
A typical home installation takes 2–4 days on site, longer if radiators or pipework are being changed. The work usually runs in stages: the outdoor unit and pipe runs, then the cylinder and indoor connections, then filling, commissioning and showing you the controls. Your heating and hot water are off for part of the work, and we agree the plan with you beforehand. Timings are typical rather than fixed. See how it works.
Why do my radiators feel cooler with a heat pump?
Radiators run at a lower temperature with a heat pump, so they feel warm rather than hot, but your rooms still reach the temperature you set. The heat pump delivers heat steadily over longer periods instead of in short, hot bursts. Correctly sized radiators and a flow temperature of around 35–50°C give comfortable, even warmth. If a room feels cold, the controls or a radiator size may need adjusting, which we can check.
Does my electricity network operator need to know about a heat pump?
Your installer notifies the electricity network operator about your heat pump where this is required, so you do not need to arrange it yourself. The network operator runs the cables and substations that supply your home, and the notification lets it confirm the local supply can handle the added load. We check your incoming supply and main fuse at survey and explain anything that affects the installation before work starts.