Replacing an old outdoor unit like-for-like has a guide price of £6,000–£9,500, installed and including VAT. Where the system needs re-sizing or other upgrades, the written quote sets out each item. Grant funding rarely applies to replacements, because the Boiler Upgrade Scheme in England and Wales cannot usually fund a home already funded for a heat pump, so we check eligibility before quoting.
We replace heat pumps in Leicestershire whoever fitted the original system, including monobloc and split units. New outdoor units in Leicestershire may differ in size from the old one, so the base and position are checked at survey. Across Leicestershire and Leicestershire, old units are removed with their refrigerant recovered by an F-gas certified engineer.
Who it suits
- Units that have failed with a major fault, such as a compressor failure
- Older units where parts are becoming hard to source
- Systems that were undersized and struggle in cold weather
- Oversized systems that short cycle and cost more to run than expected
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your quote.
Heat pump replacement prices in Leicestershire
Guide prices for Leicestershire, including VAT. We agree the visit rate before anyone attends, so there are no surprises on the day.
| Work | Installed guide price |
|---|---|
| Replacing an old outdoor unit like-for-like | £6,000–£9,500 |
| Full system replacement, 2–3 bedroom terrace or semi | £10,500–£13,500 |
| Full system replacement, 3 bedroom semi or small detached | £12,000–£15,500 |
| Full system replacement, 4 bedroom detached | £14,000–£18,000 |
Installed, inc VAT. Grant funding rarely applies to replacing a heat pump, so these prices are shown without any deduction; we check eligibility at survey.
Towns we cover in Leicestershire
We cover 11 towns in Leicestershire for heat pump replacement. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Leicester | LE1 | Oadby | 7 h 38 min |
| Loughborough | LE12 | Coalville | 7 h 36 min |
| Hinckley | LE10 | Earl Shilton | 7 h 39 min |
| Coalville | LE67 | Ashby-de-la-Zouch | 7 h 37 min |
| Wigston Magna | LE18 | Oadby | 7 h 38 min |
| Melton Mowbray | LE13 | Oakham | 7 h 36 min |
| Market Harborough | LE16 | Desborough | 7 h 39 min |
| Oadby | LE2 | Wigston Magna | 7 h 38 min |
| Earl Shilton | LE9 | Hinckley | 7 h 38 min |
| Ashby-de-la-Zouch | LE65 | Coalville | 7 h 36 min |
| Lutterworth | LE17 | Rugby | 7 h 40 min |
Heat pump replacement questions
Will a new heat pump fit where the old one was?
Sometimes. A new unit may be a different size, weight or shape and may have different clearance requirements, so the existing base and position are checked at survey. The MCS noise assessment is carried out for the new unit, and a different position may be suggested if it improves performance or reduces sound at neighbouring windows.
Can I get a grant to replace my heat pump?
Usually not. In England and Wales, the Boiler Upgrade Scheme cannot normally fund a home that has already been funded for a heat pump, and it is aimed at replacing fossil-fuel or electric heating. Your circumstances may differ, so we check eligibility before quoting. In Scotland, check Home Energy Scotland's criteria. Northern Ireland has no dedicated grant at present.
How long does an air source heat pump last?
Air source heat pumps typically last 15–20 years, depending on the quality of the original design, how hard the unit has worked, where it is sited and how well it has been serviced. Units that short cycle or run at high flow temperatures for years may wear sooner. Annual servicing helps components last and spots problems early.
What happens to my old heat pump?
The old outdoor unit is removed and disposed of responsibly. Its refrigerant is recovered first, which must be done by an F-gas certified engineer, and metals and components are recycled where facilities allow. If the old cylinder or controls are replaced too, they are removed at the same time, and pipework that is no longer needed is capped or taken out.