Heat pump replacement means removing an existing outdoor unit, and sometimes the cylinder and controls, and fitting a new heat pump sized and set up for the home as it is now. Air source heat pumps typically last 15–20 years, so systems fitted when the technology was newer to UK homes are reaching the point where repairs become harder to justify.
Across Perth and Kinross and Perth and Kinross, old units are removed with their refrigerant recovered by an F-gas certified engineer. Every replacement in Perth and Kinross starts with a fresh heat loss survey, not just a copy of the old unit's size. Some of the earlier heat pumps in Perth and Kinross are now reaching the age where replacement is worth considering.
Who it suits
- Units that have failed with a major fault, such as a compressor failure
- Heat pumps nearing the end of their typical life with rising repair costs
- Systems that were undersized and struggle in cold weather
- Oversized systems that short cycle and cost more to run than expected
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a home in Perth and Kinross, apply and receive the written offer before the installation date is fixed.
Heat pump replacement prices in Perth and Kinross
These are guide prices including VAT. The rate for your visit in Perth and Kinross is confirmed before we book it, and any repair is priced in writing before parts are ordered.
| Work | Installed guide price |
|---|---|
| Replacing an old outdoor unit like-for-like | £6,050–£9,600 |
| Full system replacement, 2–3 bedroom terrace or semi | £10,600–£13,650 |
| Full system replacement, 3 bedroom semi or small detached | £12,100–£15,650 |
| Full system replacement, 4 bedroom detached | £14,150–£18,200 |
Installed, inc VAT. Grant funding rarely applies to replacing a heat pump, so these prices are shown without any deduction; we check eligibility at survey.
Towns we cover in Perth and Kinross
We cover 7 towns in Perth and Kinross for heat pump replacement. Each links to local guide prices and the grant position for Scotland.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Perth | PH2 | Auchterarder | 6 h 51 min |
| Aberfeldy | PH15 | Pitlochry | 6 h 48 min |
| Auchterarder | PH3 | Crieff | 6 h 53 min |
| Blairgowrie | PH10 | Perth | 6 h 48 min |
| Crieff | PH7 | Auchterarder | 6 h 52 min |
| Kinross | KY13 | Dunfermline | 6 h 54 min |
| Pitlochry | PH16 | Aberfeldy | 6 h 47 min |
Heat pump replacement questions
Will a new heat pump fit where the old one was?
Sometimes. A new unit may be a different size, weight or shape and may have different clearance requirements, so the existing base and position are checked at survey. The MCS noise assessment is carried out for the new unit, and a different position may be suggested if it improves performance or reduces sound at neighbouring windows.
Can I replace just the outdoor unit?
Often, yes, if the rest of the system is sound and correctly designed. The cylinder, controls and radiators can stay where they are compatible with the new unit. Some older cylinders and controllers do not work with a new heat pump, and the survey checks this. If the original design was the problem, replacing only the unit will not fix it.
How much does it cost to replace a heat pump?
Replacing an old outdoor unit like-for-like has a guide price of £6,000–£9,500, installed and including VAT. Re-sizing, a new cylinder, radiator upgrades or new controls add to that, and each is itemised in your written quote. The final price is fixed after a survey, once we know what the existing system needs.
How long does an air source heat pump last?
Air source heat pumps typically last 15–20 years, depending on the quality of the original design, how hard the unit has worked, where it is sited and how well it has been serviced. Units that short cycle or run at high flow temperatures for years may wear sooner. Annual servicing helps components last and spots problems early.