- Area
- East Riding of Yorkshire
- Postcode district
- HU17
- Nation
- England
- Guide price
- From £9,300 inc VAT
- Survey
- Free for installation enquiries
Oil and LPG boiler replacement for Beverley homes
Every property in Beverley is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Bungalows and detached houses near Beverley running on LPG can move to a heat pump, with the tank collected by the supplier. Rural properties near Beverley usually have garden space for the outdoor unit, sited away from windows and sheltered where possible.
Off-gas homes have a lot to plan when switching to a heat pump: the fuel tank, older walls, rural power supplies and higher heat loss.
- Eligible homes in England and Wales within the higher grant window
- Detached houses and bungalows with garden space for the unit
- Older oil boilers nearing the end of their life
What's included
- Oil tank draining and removal or making safe, as set out in your quote
- Free survey with a detailed heat loss calculation for older construction
- Outdoor unit, heat pump cylinder, controls and radiator changes
- Removal of the oil or LPG boiler and flue
- Network operator notification and electrical connection
Owners across the East Riding of Yorkshire can have oil tank removal arranged alongside a heat pump installation in Beverley.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Beverley quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Oil and LPG boiler replacement prices in Beverley
The ranges below are typical installed prices for homes in the East Riding of Yorkshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Beverley can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £9,000 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,300–£12,250 | £300–£3,250 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,300–£13,250 | £1,300–£4,250 |
| 3 bedroom semi or small detached | 6–9 kW | £11,750–£15,200 | £2,750–£6,200 |
| 4 bedroom detached | 8–12 kW | £13,700–£17,650 | £4,700–£8,650 |
| 5+ bedroom or larger older house | 11–16 kW | £16,150–£22,050 | £7,150–£13,050 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. The £9,000 Boiler Upgrade Scheme figure applies to oil and LPG replacements in England and Wales installed from 21 July 2026 to 31 March 2027.
Designing for Beverley's winters
Beverley sees roughly 7 hours 24 minutes of daylight in December and 17 hours 07 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
From survey to switch-on in Beverley
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Beverley; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Replacing an oil or LPG boiler with a heat pump in Beverley: questions
What size heat pump does a Beverley home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Beverley home.
Do you cover Hull as well as Beverley?
Yes. We arrange surveys and installation in Hull, which is about 8 miles south-east of Beverley, and across the East Riding of Yorkshire.
Do I need new radiators for a heat pump in Beverley?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Beverley home gives a room-by-room list.
Will I need bigger radiators in an older cottage or farmhouse?
Often in some rooms, because thick solid walls and older windows lose more heat, and heat pumps work at lower water temperatures than oil boilers. The survey checks each room. Rooms with high ceilings or large windows are common candidates for a larger radiator. Where swapping radiators is impractical, a high-temperature unit can be considered, with lower efficiency as the trade-off.
Do I have to remove my oil tank?
Not always, but it should be emptied and made safe. A tank in good condition can be drained, cleaned and left in place, though most owners prefer to have it taken away to free up space. Old or damaged tanks are usually removed. Your quote says which option is included, and any remaining oil and sludge is disposed of properly.