- Area
- Kent
- Postcode district
- ME1
- Nation
- England
- Nearby
- Strood, Gillingham, Gravesend
Rochester is in Kent. Whether you are replacing a gas, oil or electric system, the design starts with measuring how much heat each room loses on a cold day, and survey arrangements for Rochester are confirmed when you enquire.
Heat pump services in Rochester
All services in Rochester:
Grants and rules for heat pumps in England
Homes in Rochester can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Heat pump guide prices in Rochester
Guide prices for Rochester and the rest of Kent are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,800–£12,900 | £2,300–£5,400 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,800–£13,900 | £3,300–£6,400 |
| 3 bedroom semi or small detached | 6–9 kW | £12,350–£15,950 | £4,850–£8,450 |
| 4 bedroom detached | 8–12 kW | £14,400–£18,550 | £6,900–£11,050 |
| 5+ bedroom or larger older house | 11–16 kW | £17,000–£23,200 | £9,500–£15,700 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Rochester's winters
On the shortest day Rochester gets about 7 hours 51 minutes of daylight, and the winter sun reaches only around 15° above the horizon at noon. Winters this far south are milder than in most of the UK, which helps a heat pump run at low flow temperatures for much of the season.
Heat pumps in Rochester: questions
Can you service a heat pump in Rochester that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Rochester, whoever fitted them. Tell us the make and model when you book.
What size heat pump does a Rochester home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Rochester home.
How long does installation take in Rochester?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Rochester home states the expected time.
How soon can you survey a home in Rochester?
Survey dates depend on how busy installers are in Kent. We offer the next available dates when you enquire and confirm them in writing.

