Design starts with the load: a heat loss calculation for the building, its occupancy and opening hours, how much hot water it uses and whether any spaces need cooling. From that we propose plant sizes and positions, on a roof, in a yard or in a plant enclosure, with the structural, electrical and noise checks each position needs. Larger plant may need a three-phase supply, which the network operator may need to provide or confirm.
On busy Dyfed high streets, deliveries and crane lifts are scheduled around access restrictions and opening hours. Premises in Dyfed close to homes need careful plant siting and, where required, an acoustic assessment. For blocks of flats in Dyfed, we assess whether individual units or a communal system suits the building and how it is managed.
Who it suits
- Premises that also want cooling in some areas
- Offices, shops and small commercial premises replacing gas or oil boilers
- Landlords and managing agents planning low-carbon upgrades
- Buildings with roof or yard space for outdoor plant
Grants and rules for heat pumps in Wales
In Wales the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027; £2,500 for air-to-air). The MCS-certified installer named in your quote applies to Ofgem for you, and the grant comes off your quote.
There is no VAT on installing a heat pump anywhere in the UK, Wales included, until 31 March 2027. Planning rules for heat pumps in Wales are set by the Welsh Government and differ from England's, so the surveyor checks the unit position against them.
Prices
Commercial systems are priced after a site survey and load calculation.
Towns we cover in Dyfed
We cover 11 towns in Dyfed for commercial heat pump installation. Each links to local guide prices and the grant position for Wales.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Llanelli | SA15 | Gorseinon | 7 h 48 min |
| Ammanford | SA18 | Pontardawe | 7 h 47 min |
| Aberystwyth | SY23 | Machynlleth | 7 h 40 min |
| Carmarthen | SA31 | Llanelli | 7 h 46 min |
| Cardigan | SA43 | Fishguard | 7 h 44 min |
| Fishguard | SA65 | Haverfordwest | 7 h 44 min |
| Haverfordwest | SA61 | Milford Haven | 7 h 46 min |
| Lampeter | SA48 | Carmarthen | 7 h 43 min |
| Milford Haven | SA73 | Pembroke Dock | 7 h 47 min |
| Pembroke Dock | SA72 | Milford Haven | 7 h 48 min |
| Tenby | SA70 | Pembroke Dock | 7 h 48 min |
Commercial heat pump installation questions
What is a cascaded heat pump system?
A cascaded system links two or more outdoor heat pump units to one controller, which runs as many units as demand needs. On mild days one unit might run; on cold days all of them. This keeps each unit working efficiently, spreads wear across the units and means heating can usually continue at reduced output if one unit needs repair or servicing.
Are there grants for commercial heat pumps?
It depends on the building, its size and use, who owns it and which nation it is in, and the rules differ from those for homes. We check at survey whether any scheme applies to your building in England, Wales, Scotland or Northern Ireland, and we do not include a grant in the quote unless eligibility has been confirmed.
How much does a commercial heat pump cost?
Commercial heat pumps are priced after a site survey, because cost depends on the building's heat load, the number and size of units, where the plant goes, access, and any changes to the heating system inside. We then give a written quote setting out the equipment, the programme and what is included. There is no reliable guide price for commercial work without seeing the building.
Can you install without closing the business?
Usually, yes. Outdoor plant, pipework and controls can often be installed while the existing heating still runs, with the switchover planned for a short window, such as a weekend or a quieter time of year. Work inside occupied areas can be phased. The programme in your quote sets out what happens when, so you can plan staff and customers around it.