Replacing electric heating with a heat pump means taking out storage heaters, panel heaters or an electric boiler and installing an air-to-water heat pump that heats water for radiators or underfloor heating and a hot water cylinder. If you already have an electric boiler and radiators, the change is similar to a boiler swap. If you have storage or panel heaters, there is no wet system yet, so radiators and pipework need to be installed throughout.
Owners across Shropshire moving off storage heaters can arrange a survey in Shropshire that compares running costs on their real tariff. For Shropshire homes with solid floors, the survey plans pipe routes through walls and ceilings to keep disruption predictable. Where a home in Shropshire has an airing cupboard, the immersion cylinder can often be swapped for a heat pump cylinder in the same space.
Who it suits
- Owners planning redecoration or other building work at the same time
- Homes with storage heaters or panel heaters throughout
- Bungalows and houses with suspended timber floors that make pipe runs easier
- Properties with an electric boiler and existing radiators
Grants and rules for heat pumps in England
Homes in Shropshire can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Electric heating to heat pump prices in Shropshire
These are guide prices for Shropshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Towns we cover in Shropshire
We cover 7 towns in Shropshire for replacing electric heating with a heat pump. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Telford | TF4 | Bridgnorth | 7 h 37 min |
| Shrewsbury | SY1 | Church Stretton | 7 h 37 min |
| Oswestry | SY11 | Shrewsbury | 7 h 35 min |
| Bridgnorth | WV15 | Telford | 7 h 39 min |
| Church Stretton | SY6 | Ludlow | 7 h 39 min |
| Ludlow | SY8 | Tenbury Wells | 7 h 40 min |
| Market Drayton | TF9 | Nantwich | 7 h 35 min |
Replacing electric heating with a heat pump questions
Can I replace storage heaters with a heat pump?
Yes. Storage heaters are removed and replaced with an air-to-water heat pump connected to new radiators or underfloor heating and a hot water cylinder. Because there is no existing wet system, pipework has to be run to each room, so the job is larger than a boiler swap. The survey plans pipe routes and radiator sizes before you receive a written quote.
Can I keep my electric immersion cylinder?
Usually not for heating by the heat pump, because a standard immersion cylinder has no coil, or one too small to take heat at low flow temperatures. A heat pump cylinder replaces it, often in the same cupboard, and keeps an immersion element as backup. If you choose an air-to-air system instead, which does not make hot water, the existing cylinder stays in use.
How disruptive is fitting radiators in a home that has none?
More disruptive than a boiler swap, but planned. Floorboards are lifted to run pipes, some holes are drilled through walls and radiators are hung room by room. Rooms are worked on in a set order so you can keep living at home, and holes are made good, while redecoration is usually yours. The programme in your quote shows how long each stage typically takes.
What if I live in a flat?
Many flats can have a heat pump, but you need a suitable outdoor position, such as a balcony, yard or wall bracket, and leaseholders need consent from the freeholder or management company. Planning permission may be needed depending on the nation and the building, which we check at survey. Where a wet system is impractical, an air-to-air heat pump with separate hot water is an alternative.