For installation enquiries the survey is free, and the results go straight into your written quote. If you want the calculation on its own, for example to plan building work or to compare quotes, a stand-alone heat loss survey and report has a guide price of £150–£400, including VAT.
Homeowners in Bristol thinking about insulation work can use the survey to see how it would change their heat pump size. For Bristol homes with extensions or loft conversions, each part of the house is assessed on its own construction. The survey in Bristol includes a check of where the outdoor unit could sit and how its sound would reach neighbours.
Who it suits
- Anyone getting a heat pump quote, as the first step
- Self-builders and architects who need emitter and system sizes early
- Landlords comparing properties before deciding where to switch first
- Homeowners planning insulation or building work who want to know the effect on heat demand
Grants and rules for heat pumps in England
Homes in Bristol can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat loss survey prices in Bristol
The ranges below are typical installed prices for homes in Bristol, including VAT. A survey sets the exact figure, because two similar-looking houses in Bristol can need quite different radiators and pipework.
| Survey | Guide price |
|---|---|
| Home survey and heat loss calculation with an installation quote | Free |
| Stand-alone heat loss survey and report | £150–£410 |
Inc VAT. A stand-alone report is for homeowners who want the design without an installation quote.
Towns we cover in Bristol
We cover 6 towns in Bristol for heat loss surveys. Each links to local guide prices and the grant position for England.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Bristol | BS1 | Clifton | 7 h 50 min |
| Bedminster | BS3 | Bristol | 7 h 50 min |
| Bishopston | BS7 | Westbury-on-Trym | 7 h 50 min |
| Clifton | BS8 | Bristol | 7 h 50 min |
| Fishponds | BS16 | Bishopston | 7 h 50 min |
| Westbury-on-Trym | BS9 | Bishopston | 7 h 50 min |
Heat loss surveys questions
Will the survey check noise from the outdoor unit?
Yes. The surveyor identifies possible positions for the outdoor unit and carries out the MCS noise assessment, which estimates the sound level at the nearest neighbouring window from the unit's sound power level, distance and any barriers. In England, meeting the MCS planning standards is one of the conditions for permitted development. Wales, Scotland and Northern Ireland have their own rules, which we check.
What is a design flow temperature?
The design flow temperature is the temperature of the water sent to your radiators or underfloor heating on the coldest design day. Heat pumps are more efficient at lower flow temperatures, typically around 35–50°C. Choosing it is a balance: a lower figure improves efficiency but can mean larger radiators in some rooms, so the design shows both.
Can I use the heat loss report to get other quotes?
Yes. A stand-alone heat loss report is yours to use, including sharing it with other installers so their quotes are based on the same figures. Comparing quotes like for like makes it easier to see differences in equipment, radiator upgrades and workmanship terms. The report states the assumptions used wherever construction could not be confirmed.
How long does a heat loss survey take?
A typical survey takes 1–3 hours on site, depending on the size and complexity of the home. Larger or older houses with mixed construction, extensions or many rooms take longer. The calculations and design are completed afterwards, and the results are included in your quote or stand-alone report.