Typical repairs fall within a guide range of £90–£1,100, including VAT, depending on the part and the time involved. Refrigerant repairs must be done by an F-gas certified engineer. Regular heat pump servicing catches many of these faults before they stop the system working.
For repeated faults in County Antrim, the engineer looks at the system design as well as the failed part. Across County Antrim and County Antrim, refrigerant repairs on split systems are carried out by an F-gas certified engineer. Heat pump owners in County Antrim can arrange a fault-finding visit at a rate agreed before an engineer attends.
Who it suits
- Outdoor units that have become noisy, iced up or keep switching on and off
- Heat pumps installed by another company that need a second opinion
- Systems losing pressure or needing frequent topping up
- Rooms or hot water not getting warm enough
Grants and rules for heat pumps in Northern Ireland
Northern Ireland does not have a dedicated heat pump grant for homeowners at present, and the Boiler Upgrade Scheme does not apply here. Heat pumps have sometimes been funded through the Northern Ireland Sustainable Energy Programme, so it is worth checking what is open when you enquire about a home in County Antrim.
Heat pump repairs prices in County Antrim
Guide prices for County Antrim, including VAT. We agree the visit rate before anyone attends, so there are no surprises on the day.
| Repair | Guide price |
|---|---|
| Fault-finding visit and diagnosis | £90–£170 |
| Sensor or thermistor replacement | £120–£270 |
| Expansion vessel or pressure relief valve | £150–£340 |
| Circulating pump replacement | £240–£470 |
| Fan motor replacement | £290–£630 |
| Refrigerant leak repair and re-gas (split systems) | £340–£920 |
| Main control board (PCB) replacement | £440–£1,050 |
Inc VAT. The fault-finding rate is agreed before we attend; repairs are priced in writing before parts are ordered.
Towns we cover in County Antrim
We cover 11 towns in County Antrim for heat pump repairs. Each links to local guide prices and the grant position for Northern Ireland.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Belfast | BT1 | Newtownabbey | 7 h 15 min |
| Lisburn | BT27 | Belfast | 7 h 16 min |
| Newtownabbey | BT37 | Belfast | 7 h 14 min |
| Carrickfergus | BT38 | Newtownabbey | 7 h 13 min |
| Ballymena | BT42 | Antrim | 7 h 12 min |
| Antrim | BT41 | Ballyclare | 7 h 13 min |
| Larne | BT40 | Carrickfergus | 7 h 12 min |
| Ballycastle | BT54 | Ballymoney | 7 h 07 min |
| Ballyclare | BT39 | Antrim | 7 h 13 min |
| Ballymoney | BT53 | Coleraine | 7 h 09 min |
| Portrush | BT56 | Portstewart | 7 h 07 min |
Heat pump repairs questions
How much does a heat pump repair cost?
Heat pump repairs have a typical range of £90–£1,100, including VAT, depending on the part and labour involved. Sensor replacements sit at the lower end, while control boards and refrigerant repairs on split systems sit higher. Every repair starts with a fault-finding visit, with a guide price of £90–£180 for the first hour, and the repair is priced before work goes ahead.
Do refrigerant repairs need a specialist?
Yes. Any work on a heat pump's refrigerant circuit, such as tracing a leak, replacing a component or re-gassing, must by law be done by an F-gas certified engineer where the refrigerant is fluorinated, such as R32; units using R290 (propane) need an engineer trained in flammable refrigerants. On split systems the refrigerant runs through pipes inside your home, so leaks there are more likely than on sealed monobloc units.
Can you repair a heat pump installed by another company?
Yes. We carry out fault-finding and repairs on heat pumps installed by other companies, including monobloc and split systems. Tell us the make, model and approximate age when you get in touch, plus any error code shown. If the system is still under the manufacturer's warranty, it may be quicker to contact the original installer or manufacturer first.
Why is my heat pump showing an error code?
An error code is the heat pump's way of reporting a problem it has detected, such as low water flow, a sensor reading out of range or a communication fault between units. Note the code and check the manual, as some codes clear after a simple reset or pressure top-up. If it returns, an engineer can trace the underlying cause.