Heat pump repair is the diagnosis and fixing of faults in an air source heat pump, its water circuit, its controls or the hot water cylinder. Many faults have a simple cause, such as low system pressure, a blocked filter or a control setting, while others involve a failed sensor, pump, fan or circuit board.
Heat pump owners in Renfrewshire and Inverclyde can arrange a fault-finding visit at a rate agreed before an engineer attends. Across Renfrewshire and Inverclyde and Renfrewshire and Inverclyde, refrigerant repairs on split systems are carried out by an F-gas certified engineer. Repairs in Renfrewshire and Inverclyde that need a part ordered are explained and priced before the engineer leaves.
Who it suits
- Heat pumps installed by another company that need a second opinion
- Outdoor units that have become noisy, iced up or keep switching on and off
- Heat pumps showing an error code or fault light
- Systems losing pressure or needing frequent topping up
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a home in Renfrewshire and Inverclyde, apply and receive the written offer before the installation date is fixed.
Heat pump repairs prices in Renfrewshire and Inverclyde
These are guide prices including VAT. The rate for your visit in Renfrewshire and Inverclyde is confirmed before we book it, and any repair is priced in writing before parts are ordered.
| Repair | Guide price |
|---|---|
| Fault-finding visit and diagnosis | £90–£180 |
| Sensor or thermistor replacement | £120–£280 |
| Expansion vessel or pressure relief valve | £150–£350 |
| Circulating pump replacement | £250–£480 |
| Fan motor replacement | £300–£650 |
| Refrigerant leak repair and re-gas (split systems) | £350–£950 |
| Main control board (PCB) replacement | £450–£1,100 |
Inc VAT. The fault-finding rate is agreed before we attend; repairs are priced in writing before parts are ordered.
Towns we cover in Renfrewshire and Inverclyde
We cover 10 towns in Renfrewshire and Inverclyde for heat pump repairs. Each links to local guide prices and the grant position for Scotland.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Paisley | PA2 | Barrhead | 6 h 59 min |
| Greenock | PA15 | Gourock | 6 h 57 min |
| Newton Mearns | G77 | Barrhead | 7 h 00 min |
| Renfrew | PA4 | Erskine | 6 h 58 min |
| Barrhead | G78 | Paisley | 6 h 59 min |
| Johnstone | PA5 | Bridge of Weir | 6 h 59 min |
| Erskine | PA8 | Renfrew | 6 h 58 min |
| Bridge of Weir | PA11 | Johnstone | 6 h 59 min |
| Gourock | PA19 | Greenock | 6 h 57 min |
| Port Glasgow | PA14 | Greenock | 6 h 58 min |
Heat pump repairs questions
How much does a heat pump repair cost?
Heat pump repairs have a typical range of £90–£1,100, including VAT, depending on the part and labour involved. Sensor replacements sit at the lower end, while control boards and refrigerant repairs on split systems sit higher. Every repair starts with a fault-finding visit, with a guide price of £90–£180 for the first hour, and the repair is priced before work goes ahead.
Do refrigerant repairs need a specialist?
Yes. Any work on a heat pump's refrigerant circuit, such as tracing a leak, replacing a component or re-gassing, must by law be done by an F-gas certified engineer where the refrigerant is fluorinated, such as R32; units using R290 (propane) need an engineer trained in flammable refrigerants. On split systems the refrigerant runs through pipes inside your home, so leaks there are more likely than on sealed monobloc units.
Why does my heat pump keep switching on and off?
Frequent starting and stopping, called short cycling, is usually caused by an oversized heat pump, low water flow, too many zones closing at once or controls set with too narrow a range. It reduces efficiency and wears components. An engineer can check the settings, flow rates and design, and can often improve it with control changes before any parts are needed.
Can you repair a heat pump installed by another company?
Yes. We carry out fault-finding and repairs on heat pumps installed by other companies, including monobloc and split systems. Tell us the make, model and approximate age when you get in touch, plus any error code shown. If the system is still under the manufacturer's warranty, it may be quicker to contact the original installer or manufacturer first.