Air source heat pumps, surveyed, designed and installed· Free home survey for installation enquiries
0800 088 6341
Monobloc heat pumps
England · 9 towns

Monobloc heat pumps in Cambridgeshire

Switching to a heat pump in Cambridgeshire? Start with a guide price, then a surveyor measures your home and the written quote fixes the price.

Because the refrigerant circuit is sealed at the factory, the installer does not need to handle refrigerant on site in a typical installation, which keeps the job simpler. Inside, you still have a cylinder, controls and a small set of components for the water circuit, such as pumps, valves and an expansion vessel, but there is no indoor refrigerant unit to find wall space for.

Houses in Cambridgeshire with a rear wall close to the cylinder location usually suit a monobloc unit with a short pipe run. Bungalows in Cambridgeshire often let the unit sit right beside the plant cupboard, keeping water pipes short. Semi-detached homes in Cambridgeshire often have a side wall where a monobloc unit can sit on a frame, clear of the path.

Who it suits

  • Houses and bungalows with outdoor space close to where pipes enter the home
  • Households that want to keep refrigerant work out of routine servicing
  • Homes where the unit can sit within a short pipe run of the cylinder
  • Owners who want the simplest installation, with no indoor refrigerant

Grants and rules for heat pumps in England

England

In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your quote.

Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.

Monobloc heat pumps prices in Cambridgeshire

The ranges below are typical installed prices for homes in Cambridgeshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Cambridgeshire can need quite different radiators and pipework.

Monobloc heat pumps prices in Cambridgeshire
HomeTypical sizeInstalled guide priceAfter £7,500 grant
1–2 bedroom flat or small terrace4–5 kW£9,700–£12,750£2,200–£5,250
2–3 bedroom terrace or semi5–7 kW£10,700–£13,750£3,200–£6,250
3 bedroom semi or small detached6–9 kW£12,250–£15,800£4,750–£8,300
4 bedroom detached8–12 kW£14,300–£18,350£6,800–£10,850
5+ bedroom or larger older house11–16 kW£16,850–£22,950£9,350–£15,450

Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.

Towns we cover in Cambridgeshire

We cover 9 towns in Cambridgeshire for monobloc heat pumps. Each links to local guide prices and the grant position for England.

TownPostcode districtNearest townMidwinter daylight
PeterboroughPE1Whittlesey7 h 38 min
CambridgeCB2Royston7 h 42 min
WisbechPE13March7 h 37 min
St NeotsPE19Huntingdon7 h 42 min
HuntingdonPE29St Neots7 h 41 min
MarchPE15Wisbech7 h 39 min
ElyCB6March7 h 40 min
RamseyPE26Whittlesey7 h 40 min
WhittleseyPE7Peterborough7 h 38 min

Monobloc heat pumps questions

What is the difference between monobloc and split heat pumps?

A monobloc unit holds all of its refrigerant in the outdoor unit and sends heated water into the house. A split system has an outdoor unit and an indoor unit called a hydrobox, connected by refrigerant pipes, with heat passed to water indoors. Monobloc installs are simpler; splits avoid outdoor water pipes but need an F-gas certified engineer for the refrigerant work. Our monobloc vs split guide compares them.

How far can a monobloc unit be from the house?

Usually as close as practical, because water pipes outside lose heat and need frost protection. Manufacturers set limits on pipe length and size, and longer runs need larger, better-insulated pipes. Most homes site the unit against or near an outside wall close to where the pipes enter. If the only good position is far from the house, a split system may suit better.

Are monobloc heat pumps covered by grants?

Yes. Monobloc units are air-to-water heat pumps, so in England and Wales they are covered by the Boiler Upgrade Scheme grant of £7,500 for eligible homes, or £9,000 when replacing oil or LPG heating within the published dates. In Scotland, Home Energy Scotland funding requires an MCS-certified installer and products. There is no dedicated homeowner heat pump grant in Northern Ireland at present.

Do monobloc heat pumps need an F-gas engineer?

For a typical installation no refrigerant work is needed on site, because the refrigerant circuit is sealed in the outdoor unit at the factory. That is one reason monobloc installs are simpler. If the sealed circuit ever develops a fault or leak, any repair to it must be done by an F-gas certified engineer, as with every refrigerant system.

Ready to price your heat pump?

Use the guide price tool, or book a free home survey and fixed written quote.

CallGet a quote