A heat pump hot water cylinder is an insulated tank that stores hot water heated by the heat pump, with a much larger internal coil than a cylinder designed for a boiler. Heat pumps heat water to a lower temperature than boilers, typically around 45–55°C, so a bigger coil is needed to pass heat into the stored water quickly. A standard boiler cylinder would heat slowly and make the heat pump work harder than it should.
In terraced homes around Clwyd and across Clwyd, slimline cylinders can fit spaces a standard model cannot. We check mains water pressure and flow at each Clwyd property before choosing a cylinder. Older houses in Clwyd with loft tanks can usually have them removed when an unvented cylinder is fitted.
Who it suits
- Every air-to-water heat pump installation, whatever the existing boiler
- Households with older vented cylinders and loft tanks who want mains-pressure showers
- Homes replacing a combi boiler that need space found for a cylinder
- Larger families or homes with two or more bathrooms
Grants and rules for heat pumps in Wales
Homes in Clwyd can use the Boiler Upgrade Scheme, which applies in Wales as well as England: £7,500 towards an air source heat pump, or £9,000 when it replaces oil or LPG heating for installations from 21 July 2026 to 31 March 2027. The MCS-certified installer named in your quote applies and deducts the grant.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Wales has its own permitted development rules for air source heat pumps, so we check what applies to your property, including listed building and conservation-area constraints, at the survey.
Heat pump hot water cylinders prices in Clwyd
Here are typical prices for heat pump hot water cylinders in Clwyd, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Work | Guide price |
|---|---|
| Heat pump hot water cylinder (supplied and fitted) | £1,200–£2,200 |
Supplied and fitted, inc VAT. Included in every full system price.
Towns we cover in Clwyd
We cover 16 towns in Clwyd for heat pump hot water cylinders. Each links to local guide prices and the grant position for Wales.
| Town | Postcode district | Nearest town | Midwinter daylight |
|---|---|---|---|
| Wrexham | LL13 | Rhosllannerchrugog | 7 h 33 min |
| Buckley | CH7 | Mold | 7 h 32 min |
| Deeside | CH5 | Connah's Quay | 7 h 31 min |
| Colwyn Bay | LL29 | Conwy | 7 h 30 min |
| Flint | CH6 | Connah's Quay | 7 h 31 min |
| Rhyl | LL18 | Prestatyn | 7 h 30 min |
| Rhosllannerchrugog | LL14 | Wrexham | 7 h 33 min |
| Prestatyn | LL19 | Rhyl | 7 h 30 min |
| Llandudno | LL30 | Conwy | 7 h 30 min |
| Abergele | LL22 | Rhyl | 7 h 30 min |
| Connah's Quay | CH5 | Deeside | 7 h 31 min |
| Conwy | LL31 | Llandudno | 7 h 30 min |
| Denbigh | LL16 | Ruthin | 7 h 32 min |
| Llangollen | LL20 | Rhosllannerchrugog | 7 h 34 min |
| Mold | CH7 | Buckley | 7 h 32 min |
| Ruthin | LL15 | Denbigh | 7 h 32 min |
Heat pump hot water cylinders questions
Can I keep my existing hot water cylinder with a heat pump?
Usually not. Cylinders designed for boilers have a small coil that cannot transfer heat quickly at heat pump temperatures, so the water would reheat slowly and efficiency would suffer. A heat pump cylinder has a much larger coil. The new cylinder can often go in the same cupboard, though, if there is enough height and floor space.
I have a combi boiler. Where will the cylinder go?
Moving from a combi to a heat pump means finding space for a cylinder, usually somewhere around 600 mm square and up to about 2 m tall. Common choices are a bedroom or landing cupboard, a utility room, under the stairs or an integral garage. The surveyor looks at your layout and suggests options, including slimline models where space is tight.
Do I need good water pressure for an unvented cylinder?
Yes. An unvented cylinder runs at mains pressure, so it needs enough incoming pressure and flow to supply your taps and showers well. We measure your mains supply at the survey. If flow is low, options include a different cylinder type or an upgrade to the incoming supply pipe, which we explain before you commit.
Will I run out of hot water with a heat pump?
Not if the cylinder is sized to how your household uses hot water. Unlike a combi, hot water is stored, so very heavy use, such as several long showers back to back, can use up the stored volume before it reheats. Sizing for your busiest period, and timing reheats sensibly, avoids this for most homes.